No-Bake Moulding Sand, Sand Samplers, Sand Splitters, Sand Washers, Sand Sievers, Rapid Driers, Sand Mixers, Sand Rammers, Manufacturer, Kolhapur, Maharashtra, India

NO-BAKE MOULDING SAND

EQUIPMENTS FOR STRUCTURAL PROPERTIES

SAND SAMPLER
 

 USE : It is use to collect the representative sand sample.
 Specifications : It consist of long pipe having one end Hard Tip with handle

SAND SPLITTER

.

 USE : It is use to collect the representative sand sample with proper mixing.
 Specifications
: It consist of long pipe having one end Hard Tip with handle

SAND WASHER

.

 USE : It is use to find out clay % of raw sand.
 Specifications
: Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer,  Glass  Jar, Syphon,  Wash Bottle, Sieve - 53 Micron Dia. 100 mm.
 Extra Sieve 20 Micron Dia. 100 mm
  
SAND WASHER

SAND SIEVER                 

.

 USE: It is use to find out AFS [Fineness No.] of sand
 Specifications:
Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53,  75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per  Requirement) Timer 0-15 Min.
SAND SIEVER

RAPID DRIER

.

 USE: It is use to drying the sand sample.
 Specifications:
Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.
RAPID DRYER

SAND MIXER

.

 USE : It is use to mixing for co 2 sand, two parts Nobake sand.
 Specifications :
Capacity - 10 Kg [Batch], Motor with Gear Box1/2 HP Single Phase,  Scraper - 2 Nos.
SAND MIXER

SAND RAMMER

 

 USE: It is use to prepare standard specimen for further test.
 Specifications: With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal  Cup And Stripper.
SAND RAMMER

ATTACHMENTS TO SAND RAMMER

A

 Base Block

B

 Tensile Core Box

C

 Transverse Core Box

D

 Split Specimen Tube

PERMEABILITY TESTER

 

 USE: It is use to determine porosity in Raw sand, Green, Nobake sand.
 Specifications
: With Air Tank, Water Tank, Manometer Unit, Permeability Chart,2 Orifices And Syphon Unit

PERMEABILITY TESTER [ELECTRIC]

 

 USE: It is use to determine porosity in Raw sand, Green & Nobake sand
 Specifications:
electric blower, Speed Regulator, Pressure Gauge, 2 Orifices
PERMEABILITY TESTER

ATTACHMENTS TO PERMEABILITY TESTER

A

 Mold Permeability Tester

B

 Core Permeability Tube

C

 Base Permeability Tube

UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

 USE : It is use to determine Compression Shear, Tensile strength Green sand and  Nobake sand, co2  sand.
 Specification: Suitable For Compression Strength, Tensile Strength, Transverse  Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On  Compression Scale For Low Gauge 1600 Gms/Cm2  On Compression Scale With  Compression Pads
UNIVERSAL STRENGTH MACHINE
UNIVERSAL STRENGTH MACHINE [MECHANICAL AND DIGITAL]

 

 USE : It is use to determine Compression, Shear, Tensile strength of Green sand and  Nobake sand, co 2  sand.
 Specifications:
Suitable For Compression Strength, Tensile Strength, Transverse  Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale  With Motorized Loading Mechanism, Load Cell,  Digital Strength Indicator And  Compression Pads
UNIVERSAL STRENGTH MACHINE

ATTACHMENTS TO STRENGTH MACHINE

A

 High Dry Strength Attachments

B

 Shear Strength Attachments

C

 Tensile Strength Attachments

D

 Transverse Strength Attachments

CORE HARDNESS TESTER

 

 USE : It is use to determine surface hardness of Core Mould.
 Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.
CORE HARDNESS TESTER
 
CORE GAS DETERMINATOR

 

USE : It is use to determine gas evolution in the shell sand.
Specification
: Heater-1200 Watts, 230v.,A.C.Supply.With Furnace Of 1200 o c Cap., Digital Temp. Indicator-Controller, Combustion Tube, Boats, Pusher Measuring Tube.

GANG CORE BOX FOR COMPRESSION SPECIMEN

 

Use : It is used to prepare the standard specimen for compression
Specifications : consist of rubber boss with standard orifice

GANG CORE BOX FOR TENSILE SPECIMEN

 

 Use: it is used to prepare the standard specimen for Tensile
 Specifications : consist of instrument Clamping spring & 5nos standard wts.
GANG CORE BOX
GANG CORE BOX FOR TRANCEVERSE SPECIMEN

 

 Use it is used to prepare the standard specimen for transverse
 Specifications :
consist of instrument Clamping spring & 5nos standard wts.
GANG CORE BOX
CALIBRATION KIT

A

 FOR SAND RAMMER

 

 USE: It is use to standardize Sand Rammer
 Specifications :
It consist precisian specimen tube, Height Gauge 50mm. with NABL  Accreditation Lab  certificate
SAND RAMMER
 

B

 FOR MOISTURE TESTER

 

 USE: It is use to standardize Moisture Tester
 Specifications :
It consist Cap with master Gauge It is manufacturer Std.

C

 FOR STRENGTH MACHINE

.

 USE: It is use to standardize the Universal Strength Machine.
 Specifications : 
STRENGTH MACHINE
   
 

 1) For Low Capacity: - it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2 .on  compression 
     scale. Without NABL Calibration certificate

     As above with NABL Calibration certificate

 2) For High Capacity: - it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on  compression 
     scale. Without NABL Calibration certificate

     As above with NABL Calibration certificate

D FOR PERMEABILITY METER

 

Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

E FOR MOULD AND CORE HARDNESS TESTER

 

 Use it is used to standardize the mould & core hardness tester
 Specifications
: consist of instrument Clamping spring & 5nos standard weights.
CORE HARDNESS TESTER
   
 
 
Designed by : MID  Hosted by : PBD  Promoted by : GID