GREEN MOULDING SAND

EQUIPMENTS FOR STRUCTURAL PROPERTIES

•

SAND SAMPLER

USE : It is use to collect the representative sand sample.
Specifications : It consist of long pipe having one end Hard Tip with handle

•

SAND SPLITTER

USE : It is use to collect the representative sand sample with proper mixing.
Specifications : It consist of long pipe having one end Hard Tip with handle

•

SAND WASHER

USE : It is use to find out clay % of raw sand. Specifications : Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator, Timer, Glass Jar, Syphon, Wash Bottle, Sieve - 53 Micron Dia. 100 mm. Extra Sieve 20 Micron Dia. 100 mm

•

METHYLENE BLUE CLAY TESTER

USE : It is use to find out active clay % of sand. Specifications : Stirrer - Magnetic Type, Titration Stand, Burette -50 ml. , Methylene Blue Bottle.

•

SAND SIEVER

USE: It is use to find out AFS [Fineness No.] of sand Specifications: Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53, 75, 106, 150, 212, 300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per Requirement) Timer 0-15 Min.

•

RAPID DRIER

USE: It is use to drying the sand sample. Specifications: Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.

EQUIPMENT FOR BENTONITE PROPERTIES

•

LIQUID LIMIT

USE : It is use to find out liquid limit of Bentonite. Specifications: Includes Rubber Base, Sliding Carriage, Metallic Bowl, Gauge Block And Grooving Tool

EQUIPMENTS FOR SAND PREPARATION

•

SAND MULLER

USE: It is use to mixing mulling purpose of Green Sand Specifications: Capacity - 5 Kg [Batch], Motor with Gear Box 1/2 HP Single Phase, Scraper, Roller - 2 Nos. two ploughs, water sprinkling system

EQUIPMENTS FOR VARIOUS PROPERTIES OF GREEN SAND

•

RAPID MOISTURE TESTER

USE: It is use to determine moisture % in Raw sand and Green sand.
Specifications:- Capacity 10 % Moisture With Single Pan Balance, Absorbent Compound And Carrying Case

•

SAND RAMMER

USE: It is use to prepare standard specimen for further test. Specifications: - With Sliding Weight, Lifting And Ramming Cam, Specimen Tube, Pedestal Cup And Stripper.

ATTACHMENTS TO SAND RAMMER

Base Block

Tube Filler

Compatibility Tester

Flowability Tester

•

PERMEABILITY TESTER

USE: It is use to determine porosity in Raw sand, Green, Nobake sand.
Specifications :- With Air Tank, Water Tank, Manometer Unit, Permeability Chart,2 Orifices And Syphon Unit

•

PERMEABILITY TESTER [ELECTRIC]

USE : It is use to determine porosity in Raw sand, Green & Nobake sand Specifications: electric blower, Speed Regulator, Pressure Gauge, 2 Orifices

ATTACHMENTS TO PERMEABILITY TESTER

Mold Permeability Tester

Core Permeability Tube

Base Permeability Tube

•

UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

USE : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand. Specification: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2 On Compression Scale With Compression Pads

•

UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

USE : It is use to determine Compression, Shear, Tensile strength of Green sand and Nobake sand, co 2 sand. Specifications: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale With Motorized Loading Mechanism, Load Cell, Digital Strength Indicator And Compression Pads

ATTACHMENTS TO STRENGTH MACHINE

Shear Strength Attachments

Splitting Strength Attachments

Twin Transverse Strength Attachments

Deformation Attachments

•

GREEN COMPRESSION STRENGTH MACHINE

USE : It is use to determine Compression strength of Green sand Specifications: with spring balance (0-2500 gm/cm 2 ), tray

•

MOULD STRENGTH TESTER

USE : It is use to determine compression strength of Mould.
Specification : With Dial Indicator with Special Tip to Measure Compression Strength on direct Mould.
Capacity 2 Kg/cm 2

•

MOULD STRENGTH TESTER

USE : It is use to determine surface hardness of Green Mould.
Specification: Dial Indicator To Measure Hardness of Mould 0 - 100 No.

•

MOULD HARDNESS TESTER (DIGITAL) (‘B' SCALE)

USE : It is use to determine surface hardness of Green Mould. Specification: Digital Dial Indicator To Measure Hardness of Mould 0 - 100 No.

•

CORE HARDNESS TESTER

USE : It is use to determine surface hardness of Core Mould. Specification : Harden Tip, to Measure Hardness of Cores 0 To 100 No.

•

CORE HARDNESS TESTER

USE : It is use to determine the mouldability index of green sand. Specifications :Sieve Drum, Timer, Infra Red Lamp, Pan & 9.5mm Sieve

•

SHATTER INDEX TESTER

USE : To determine the Shatter Index of moulding sand. Specification : Pillar, Top Housing Bracket, Anvil, 12.5 mm Sieve, Lid, pan

•

WET TENSILE TESTER

Use : It is use to determine wet tensile strength of green sand. Specifications : - Suitable For Wet Tensile Strength of green sand. Capacity 60 gm/Cm 2 Motorized Loading unloading Mechanism, Load Cell, pneumatic cylinder hot plate for heat the specimen up to 300 o C Digital Strength Indicator. Timer, Working on 230 volt, 50 cycles, 750 watts Power Supply.

•

Calibration Kit

FOR SAND RAMMER

USE: It is use to standardize Sand Rammer Specifications : It consist precisian specimen tube, Height Gauge 50mm. with NABL Accreditation Lab certificate

USE: It is use to standardize Moisture Tester
Specifications : It consist Cap with master Gauge It is manufacturer Std.

FOR STRENGTH MACHINE

USE: It is use to standardize the Universal Strength Machine. Specifications :

1)ForLowCapacity : it consists of Force easuring Devicehaving capacity 0 to 4 kg/cm 2 on compression
scale. Without NABL Calibration certificate

As above with NABL Calibration certificate

2) For High Capacity : it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on compression
scale. Without NABL Calibration certificate

As above with NABL Calibration certificate

FOR PERMEABILITY METER

Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

FOR MOULD AND CORE HARDNESS TESTER

Use it is used to standardize the mould & core hardness tester Specifications : consist of instrument Clamping spring & 5nos standard weights.