CO2 MOULDING SAND

 

SAND SAMPLER

.

 USE : It is use to collect the representative sand sample.
 Specifications
:
It consist of long pipe having one end Hard Tip with handle

 

SAND SPLITTER

.

USE :It is use to collect the representative sand sample with proper mixing.
Specifications
: It consist of long pipe having one end Hard Tip with handle

SAND WASHER

.

 USE : It is use to find out clay % of raw sand.
 Specifications
:
Motor - 1/20 Hp Single Phase, Cycles – 50, Speed Regulator,  Timer, Glass Jar, Syphon,
 Wash Bottle, Sieve - 53 Micron Dia. 100 mm.
SAND WASHER

SAND SIEVER

.

 USE: It is use to find out AFS [Fineness No.] of sand
 Specifications:
Motor - 1/8 Hp Single Phase, Cycles – 50, Sieve Set as per ISS No 53,  75, 106, 150, 212,  300, 425, 600, 850, 1700 Micron. Dia. 200 mm, OR (Sieves As Per  Requirement) Timer 0-15 Min.
SAND SIEVER

RAPID DRIER

.

 USE: It is use to drying the sand sample.
 Specifications: Infra Red Lamp, 275 Watts, Drying Chamber Drying Pan.
RAPID DRYER

SAND MIXER

.

 USE : It is use to mixing for co 2 sand, two parts Nobake sand.
 Specifications :
Capacity - 10 Kg [Batch], Motor with Gear Box1/2 HP Single Phase,  Scraper - 2 Nos.
SAND MIXER

SAND RAMMER

.

 USE: It is use to prepare standard specimen for further test.
 Specifications: -
With Sliding Weight, Lifting And Ramming Cam, Specimen Tube,  Pedestal Cup And  Stripper.
SAND RAMMER

ATTACHMENTS TO SAND RAMMER

A

 Base Block

B

 Tensile Core Box

C

 Transverse Core Box

D

 Split Specimen Tube

E

CO 2 GASSING ACCESSORY FOR COMPRESSION SPECIMEN

.

USE: It is a accessory to passing the co 2 gas In Standard Specimen.
Specifications: -
Specimen Holder With Gas Sealing Facility.

F

CO 2 GASSING ACCESSORY FOR TENSILE SPECIMEN

.

USE: It is a accessory to passing the co 2 gas In Tensile Specimen.
Specifications: -
Tensile Specimen Holder With Gas Sealing Facility

G

CO 2 GASSING ACCESSORY FOR TRANSVARSE SPECIMEN

.

USE: It is a accessory to passing the co 2 gas In Transverse Specimen.
Specifications : -Transverse Specimen Holder With Gas Sealing Facility.

PERMEABILITY TESTER

.

USE: It is use to determine porosity in Raw sand, Green, Nobake sand.
Specifications :- With Air Tank, Water Tank, Manometer Unit, Permeability Chart,2 Orifices And Syphon  Unit

PERMEABILITY TESTER [ELECTRIC]

.

 USE : It is use to determine porosity in Raw sand, Green & Nobake sand
 Specifications: electric blower, Speed Regulator, Pressure Gauge, 2 Orifices
PERMEABILITY TESTER

ATTACHMENTS TO PERMEABILITY TESTER

A

 Mold Permeability Tester

B

 Core Permeability Tube

C

 Base Permeability Tube

UNIVERSAL STRENGTH MACHINE [HYDRAULIC]

 

USE : It is use to determine Compression Shear, Tensile strength Green sand and Nobake sand ,co 2 sand.
Specification: Suitable For Compression Strength, Tensile Strength, Transverse Strength With The Help Of Attachment, Capacity: For High Gauge 13 Kg/Cm2 On Compression Scale For Low Gauge 1600 Gms/Cm2
On Compression Scale With Compression Pads

UNIVERSAL STRENGTH MACHINE [MECHANICAL AND DIGITAL]

 

 USE : It is use to determine Compression, Shear, Tensile strength of Green sand and  Nobake sand, co 2  sand.
 Specifications: Suitable For Compression Strength, Tensile Strength, Transverse  Strength With The Help Of Attachment, Capacity 15 Kg/Cm2 On Compression Scale  With Motorized Loading Mechanism, Load Cell,
 Digital Strength Indicator And Compression Pads
UNIVERSAL STRENGTH MACHINE

ATTACHMENTS TO STRENGTH MACHINE

A

 High Dry Strength Attachments

B

 Shear Strength Attachments

C

 Tensile Strength Attachments

D

 Transverse Strength Attachments

CORE HARDNESS TESTER

 

 USE : It is use to determine surface hardness of Core Mould.
 Specification :
Harden Tip, to Measure Hardness of Cores 0 To 100 No.
CORE HARDNESS TESTER
 

CORE GAS DETERMINATOR

CALIBRATION KIT

A

FOR SAND RAMMER

 

 USE: It is use to standardize Sand Rammer
 Specifications : It consist precisian specimen tube, Height Gauge 50mm. with NABL  Accreditation Lab  certificate
SAND RAMMER
 

B

FOR STRENGTH MACHINE

 

USE: It is use to standardize the Universal Strength Machine.
Specifications : - 1) For Low Capacity: - it consists of Force Measuring Device having capacity 0 to 4 kg/cm 2.
on compression scale. Without NABL Calibration certificate As above with NABL Calibration certificate
2) For High Capacity: - it consist of Force Measuring Device having capacity 0 to 12 kg/cm 2 .on  compression scale. Without NABL Calibration certificate

C

As above with NABL Calibration certificate

 FOR PERMEABILITY METER

 

Use : It is used to standardized permeability tester
Specifications : consist of rubber boss with standard orifice

D

FOR MOULD AND CORE HARDNESS TESTER

 

 Use: it is used to standardize the mould & core hardness tester
 Specifications :
consist of instrument Clamping spring & 5nos standard weights.
CORE HARDNESS TESTER
 
 
Designed by : MID  Hosted by : PBD  Promoted by : GID